When setting up a saltwater fish tank, you might have to face some troubles. Therefore, there are certain things that you must bear in mind before getting started. First, confirm the container does not have any leakage points.
Then, make the tank uncontaminated with a solution of one spoon full of untainted bleach for each five gallons of water. Once you are done with the second step, follow it by scrubbing the tank, decorating it with plastic flora, and rocks. Wash everything systematically using clean water for several times.
Next, fasten the filtration system cautiously as per the manufacturer's commands. This is important because all the tank models differ in their system. Rinse the substrate carefully before putting it in the tank. Attach the base and position the plants in it carefully. Use a hydrometer and add salt in it to adjust the gravity between1.020-1.023. Then, leaving about an edge at the tank’s brim, fill your tank with sea water.
Once you are done with these basic steps, commence the sieving system of the tank. Affix the thermometer and heater and adjust the temperature between 75 degrees and 80 degrees because almost all marine fish perform optimally at this temperature. Then, allow the whole set up to run for at least seventy two hrs and acquire the required warmth. The fish tank must have the essential bacteria needed to sustain a stable biological cycle.
When the chemical levels and the temperature reach optimal levels, adjust your fish tank temperature accordingly. Acquire a protein skimmer as required for the tank. It will be helpful in eradicating organic waste from the water before it converts into nitrates.
More Articles :